Hey fellow TR members, my name is Alen Nguyen and I've been following and reading up on TR for a while now and its time for me to begin my scratch build! This will be my first scratch build ever and first scooter ever so bare with me if I make a mistake with anythingâ¦There are so many inspirational builds on here that inspired me to start my own buildâ¦Lately, I've been slowly gathering parts for my build here and thereâ¦I will have many questions throughout this build so any help from you gurus will be greatly appreciated since I have no experience in any Ruckus besides reading on everyones buildsâ¦If you see anything I should do or need to change, feel free to input anythingâ¦It will be built in stagesâ¦Stage 1 = Rear Frame, Stage 2 = Front Frame, Stage 3 = Electrical Work (Wire Tuck, Wire Harness, Motor Work)â¦I'm in no rush to build thisâ¦just want to get it done right especially for the first build ever
I'm now piecing parts together so I can ship it off to Justin @ SCG Creations for a Custom One Piece "Suicide" Frameâ¦.Some of the main specs that I am going for is:
232cc GY6 (Will be using a stock 150ccGY6 for beaters first)
Dual Center Mounted Shocks
One Piece Sharp Tail Suicide Frame
13x8 Dorbyworks 2pc. Mesh Love
Rear Disk Brake Conversion
Foot Brake Conversion
Minimum Stretch as possible yet low stances...
Now onto the parts I've gathered so farâ¦
2005 Titled Front Frameâ¦..Thanks to Shiba999!!!
MOJO GY6 8" Fatty Weld-on Mounts and DUAL Center Shock Mountsâ¦..Thanks to PRAY FOR MOJO!!!
HRH "Savage" Gussets Setâ¦..Top notch quality pieces with back plate!!!
Dual 600lbs Pit Bike Shocks for Center Mountâ¦..1200lbs total to compensate the mounting angle!!!
Killer Scooter Foot Brake Conversionâ¦..Thanks to Steady Garage!!!
Brand New 2013 CRF450 Rear Master Cylinderâ¦..Can't run the Foot Brake Conversion without this baby!!!
Red Anodized Banjo Boltsâ¦..Just to add some color to the boring looking CRF450 Master Cylinder
I have more parts on the way and waiting for me when I get home from workâ¦until then, SUBSCRIBE or check back later for more details on the build! Thanks TR!!!