TotalRuckus
http://totalruckus.com/phpBB3/

MET2Rox Project (Metruck)
http://totalruckus.com/phpBB3/viewtopic.php?f=94&t=95348
Page 2 of 4

Author:  Rowe94 [ Fri Apr 29, 2016 7:02 am ]
Post subject:  Re: MET2 Project

Where did you get your mini-fatty? Sweet build!

Author:  micahrox [ Fri Apr 29, 2016 8:11 am ]
Post subject:  Re: MET2 Project

CloudRuckus wrote:
Very nice. I like the mets with only the front Body panels and ruckus rear end.

THANKS CloudRuckus !!


Rowe94 wrote:
Where did you get your mini-fatty? Sweet build!

Thanks Rowe94
I got the wheel from eBay - for like 25 bucks.
It's a 10x5 .... which worked fine with my full MET set up - but, since changing to the RUCKUS rear end .... I'd rather run a 12x5. :)

Here's a test run / mock-up Pic
Image

Author:  Rucked_UP [ Fri Apr 29, 2016 1:35 pm ]
Post subject:  Re: MET2 Project

Nicely done :banger:

Author:  micahrox [ Mon May 02, 2016 12:04 pm ]
Post subject:  Re: MET2 Project

Rucked_UP wrote:
Nicely done :banger:

Thanks Rucked_UP !!
I really like .... your all white, with black wheels setup. :highfive:




This is how the #METROX2 sits, as of now .... I'm really digging her new look !! :D

Image

Time to start working on the front end. :banger:
As we ALL know ... the "project" is NEVER really done.....HUH ?

If anyone has a DISC front end for sale - LMK. :D
Might be interested.

Author:  micahrox [ Fri May 27, 2016 6:50 pm ]
Post subject:  Re: MET2 Project

Working on a rear wheel upgrade - from 10x5 mini to a 12x6 wheel.

Does anyone have a 1' inch (FLP type) spacer that fits a kymco hub, for sale .... or lying around in the extra parts stash ?!?
Wanting it ..... for the rear disc brake set up. :banger: LMK !!
Thanks !!

Image

Author:  Rucked_UP [ Wed Jun 22, 2016 11:55 am ]
Post subject:  Re: MET2 Project

Looks awesome but need more pics! Any shots of where you hid the electronics? super clean :highfive:

Author:  scooterKap [ Wed Jun 22, 2016 1:08 pm ]
Post subject:  Re: MET2 Project

Looking good. I'm looking to do something similar.

Author:  Toaneezy [ Thu Jun 23, 2016 9:23 am ]
Post subject:  Re: MET2 Project

looking clean. Keep it up :banger:

Author:  micahrox [ Mon Jun 27, 2016 11:52 am ]
Post subject:  Re: MET2 Project

Rucked_UP wrote:
Looks awesome but need more pics! Any shots of where you hid the electronics? super clean :highfive:

Thanks !!
I don't have any pictures of relocated CDI and battery - but, it's right in front of the engine under the floor board.
I'll snap one, on the next tear down

scooterKap wrote:
Looking good. I'm looking to do something similar.

Do It .... :banger:
Seems like a lot more people are interested in building METRUCKs, now.
Been seeing more and more.

Toaneezy wrote:
looking clean. Keep it up :banger:

Thanks !!

I'm just waiting on my front wheel to come in ....
So, I can finally finish up the front disc brake conversion.

Here's a couple more pics -
With the 12x6 wheel, mounted.

Image

Image

Image

Author:  micahrox [ Tue Jul 05, 2016 8:09 am ]
Post subject:  Re: MET2 Project

Out with the DRUM and in with the DISC
- New front wheel upgrade !! :banger:

Image
Image
Image

Author:  Toaneezy [ Tue Jul 05, 2016 11:07 am ]
Post subject:  Re: MET2 Project

looking good
micahrox wrote:
Out with the DRUM and in with the DISC
- New front wheel upgrade !! :banger:

Image
Image
Image

Author:  scooterKap [ Tue Jul 05, 2016 12:41 pm ]
Post subject:  Re: MET2 Project

Damn man. That's dope. I need to catch up :headbashing:

Author:  micahrox [ Wed Jul 06, 2016 12:57 pm ]
Post subject:  Re: MET2 Project

scooterKap wrote:
Damn man. That's dope. I need to catch up :headbashing:

Thanks !!

Oh, believe me .... it's takes a bit of time and most all, money, :|
I've bought a bunch of parts that didn't fit so, make sure you study up. :)
Been a great learning experience, though

Good Luck on your build !!

Author:  micahrox [ Sat Jul 16, 2016 8:48 am ]
Post subject:  Re: MET2Rox Project (Metruck)

Finally hit the +45mph mark after doing some tuning and trying out different intakes. I know I'm limited, because I'm still running a stock exhaust - but was able to hit 49.5 on the same road I've been tuning on for the past couple of months.
Bounced the rev-limiter a few time, too - So, I guess it's time for a CDI. :)

I also know, this mile stone is old news for some ....
But it's pretty exciting for ME !!
(My Thread :P)

Image

Author:  Toaneezy [ Sun Jul 17, 2016 12:15 pm ]
Post subject:  Re: MET2Rox Project (Metruck)

:banger:
micahrox wrote:
Finally hit the +45mph mark after doing some tuning and trying out different intakes. I know I'm limited, because I'm still running a stock exhaust - but was able to hit 49.5 on the same road I've been tuning on for the past couple of months.
Bounced the rev-limiter a few time, too - So, I guess it's time for a CDI. :)

I also know, this mile stone is old news for some ....
But it's pretty exciting for ME !!
(My Thread :P)

Image

Page 2 of 4 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/