Our motto says it all: "We would like to ride in zoomer which is not easily defeated by anyone."

Members Rides Members Rides   TR Ride of the Month TR ROTM   * Ride Utility   Scoot TV Scoot TV   Support TR buy a shirt! TR Store * Login * Register
* FAQ 
Post new topic Reply to topic  [ 49 posts ]  Go to page 1, 2, 3, 4  Next
Author Message

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1002
Location: Laplace, La
Gender: Dude
The way it should be
Offline
 Post subject: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Thu Jul 22, 2010 11:00 pm 
Not getting your answer elsewhere? You may ask here if you wish and I will try to answer to the best of my ability on here or by PM if necessary. Please give me time as I may or may not be able to submit a response quickly but I will try to be as fast as possible.

_________________
Click the below links for info on all of my products and services such as Performance Engines, JC20 Carb Kits, Lightened Flywheels.
JC Racing

http://www.jcracingonline.com

My Ride


Top
 Profile  
 

Shot Caller
Shot Caller

Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1556
Location: miami, fl
Gender: Dude

Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sat Sep 11, 2010 3:41 pm 
Perhaps details can be listed for problems and possible diagnostics .

For ex.
Problem= No spark

Possible Dianostic=
Check output from stator for volts ac output

Poor grounds
Bad coil
Bad rectifier
Bad stator

_________________
DORBYWORKS FACE BOOK .http://www.facebook.com/dorbyworks

http://www.dorbyworks.ecrater.com

http://www.dorbyworks.com for media


Top
 Profile  
 

Needs Training Wheels
Needs Training Wheels
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 36
Location: the chi.
Gender: Dude
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sat Oct 09, 2010 5:54 pm 
jc20 carb
35sj/80mj
k&n 62-1513 Main Air Filter
kitaco cdi
posh coil
polini carb
5.5 dr pulley weights
2 brothers exhaust

i put a longer intake tube onto the carb and i have started to get a bog at about 20mph. any ideas? do i have to go lower or higher on my sj?

_________________
"G Phi G" Ruckus
"The Black and Gold!"
-JC20 carb
-35sj/80mj
-K&N 62-1513 Main Air Filter
-Kitaco cdi
-Posh coil
-Polini variator
-5.5 gram Dr. Pulley weights
-Two Brothers M-2 Carbon Fiber 14" Canister
-50+mph club, fuckin finally!


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1002
Location: Laplace, La
Gender: Dude
The way it should be
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sun Oct 10, 2010 9:29 pm 
Have you tried either yet? The slow jet probably isn't the answer the needle most likely is. Try different setups and see what works the best.
In my short amount of testing, the 20mm carbs don't really like a very long intake system. This was on a big bore in a very short time span for tuning. We ended up taking it off before spending a whole lot of time on it.

_________________
Click the below links for info on all of my products and services such as Performance Engines, JC20 Carb Kits, Lightened Flywheels.
JC Racing

http://www.jcracingonline.com

My Ride


Top
 Profile  
 

Needs Training Wheels
Needs Training Wheels
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 36
Location: the chi.
Gender: Dude
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Thu Oct 14, 2010 9:43 am 
yeah, i just went back to having it on my carb directly. thanks for your time. i'm sure i'll be back here soon....lol. your flywheel will be mine by this winter!!!!! :banger:

_________________
"G Phi G" Ruckus
"The Black and Gold!"
-JC20 carb
-35sj/80mj
-K&N 62-1513 Main Air Filter
-Kitaco cdi
-Posh coil
-Polini variator
-5.5 gram Dr. Pulley weights
-Two Brothers M-2 Carbon Fiber 14" Canister
-50+mph club, fuckin finally!


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1002
Location: Laplace, La
Gender: Dude
The way it should be
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sat Oct 16, 2010 7:58 pm 
Good Deal

_________________
Click the below links for info on all of my products and services such as Performance Engines, JC20 Carb Kits, Lightened Flywheels.
JC Racing

http://www.jcracingonline.com

My Ride


Top
 Profile  
 

Troll
Troll
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 2284
Location: San Mateo, Cali
Gender: Dude

Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Mon Oct 18, 2010 8:40 am 
I've got a carb question for you... I think this might be a simple problem
I have an OKO 28mm.... has run fine in the past.
Re-installed it on a different bike, and now- it idles fine, but as soon as I give it any throttle, it dies.

_________________
The El Ruckuso Custom Forward Peg Mounts

The El Ruckuso
Project: MANIMAL


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1002
Location: Laplace, La
Gender: Dude
The way it should be
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Mon Oct 18, 2010 10:21 pm 
El Ruckuso wrote:
I've got a carb question for you... I think this might be a simple problem
I have an OKO 28mm.... has run fine in the past.
Re-installed it on a different bike, and now- it idles fine, but as soon as I give it any throttle, it dies.


How different is the other bike from the one it is installed on currently. Sounds like it just needs to be rejetted for the new bike it is now on.

_________________
Click the below links for info on all of my products and services such as Performance Engines, JC20 Carb Kits, Lightened Flywheels.
JC Racing

http://www.jcracingonline.com

My Ride


Top
 Profile  
 

Troll
Troll
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 2284
Location: San Mateo, Cali
Gender: Dude

Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Tue Oct 19, 2010 8:38 am 
jc250r31 wrote:
El Ruckuso wrote:
I've got a carb question for you... I think this might be a simple problem
I have an OKO 28mm.... has run fine in the past.
Re-installed it on a different bike, and now- it idles fine, but as soon as I give it any throttle, it dies.


How different is the other bike from the one it is installed on currently. Sounds like it just needs to be rejetted for the new bike it is now on.

Could be... went from a stock GY to a 180cc... I'll have to mess around with the jets

_________________
The El Ruckuso Custom Forward Peg Mounts

The El Ruckuso
Project: MANIMAL


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1337
Location: Tucson, AZ
Gender: Dude
The way it should be
2011 TR Donor
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sun Dec 25, 2011 5:38 pm 
I am getting a pe20 carb and wanna know what needs to be done about TPS and IAC sensors?

_________________
BUILD THREAD
AZRUCKSTARS


Top
 Profile  
 

Junior Mint
Junior Mint

Years on TRYears on TRYears on TRYears on TRYears on TR

Posts: 136
Location: HAWAII
Gender: Dude

Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sun Jan 01, 2012 4:24 am 
El Ruckuso wrote:
jc250r31 wrote:
El Ruckuso wrote:
I've got a carb question for you... I think this might be a simple problem
I have an OKO 28mm.... has run fine in the past.
Re-installed it on a different bike, and now- it idles fine, but as soon as I give it any throttle, it dies.


How different is the other bike from the one it is installed on currently. Sounds like it just needs to be rejetted for the new bike it is now on.

Could be... went from a stock GY to a 180cc... I'll have to mess around with the jets

I read somewhere that we need to re-jet to smaller jets for the 28-30mm oko carbs when we use it on the gy6. I'll be using this set up also so I'll be back on here when I do the swap

_________________
BUILD THREAD--> STEALTH BOMBER viewtopic.php?f=92&t=74925


Top
 Profile  
 

Ride Game Participant
Ride Game Participant
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 5262
Location: Central FL
Gender: Dude
The way it should be
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sun Jan 01, 2012 8:37 am 
AZRUCKR wrote:
I am getting a pe20 carb and wanna know what needs to be done about TPS and IAC sensors?


Nothing, just unplug them and leave them off, if you want to get fancy then you can unwrap the harness and remove the unused wires

Were currently running my buddies stock ruck without both of these and it still runs fine

_________________
-Ruckus
-Big Ruckus
-Grom


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1337
Location: Tucson, AZ
Gender: Dude
The way it should be
2011 TR Donor
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Sun Jan 08, 2012 10:42 am 
Will a pe20 carb be a large gain on a stock motor? I have mnnthbx exhaust, variator and clutch. Just not sure how much of a gain in power it would be.

_________________
BUILD THREAD
AZRUCKSTARS


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1002
Location: Laplace, La
Gender: Dude
The way it should be
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Mon Jan 09, 2012 1:24 pm 
I dont use the PE20 carbs, only the PC20s, so I cant give you any details on that one. Sorry about that.

_________________
Click the below links for info on all of my products and services such as Performance Engines, JC20 Carb Kits, Lightened Flywheels.
JC Racing

http://www.jcracingonline.com

My Ride


Top
 Profile  
 

Shot Caller
Shot Caller
User avatar
Years on TRYears on TRYears on TRYears on TRYears on TR

Posts: 1337
Location: Tucson, AZ
Gender: Dude
The way it should be
2011 TR Donor
Offline
 Post subject: Re: Questions and Answers regarding Carbs, Engines, Performance
PostPosted: Tue Jan 10, 2012 8:17 pm 
How much of a gain is pc20 carb then?

_________________
BUILD THREAD
AZRUCKSTARS


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 49 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC - 8 hours [ DST ]


Check out who is online and not out riding.

Rucksters browsing this forum: No rucksters and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
 
Copyright Owners: click here to report copyright infringement

Technophobes: click here if you are having issues registering or logging in

TotalRuckus.com 2005-2015 (That’s 10 F’ing years!) - All Rights Reserved --- Powered by phpBB © phpBB Group